| Digitizer
Pedestal (Model
DKT-XJ5A) |
 |
Smooth-turning crank with
precision rack & pinion. |
|
Gas spring adjusts table
height from 28.5 to 44.5 inches. |
|
Tilt angle from 0° to near 90°. |
|
Includes Levelers or optional
Casters (4-Caster Set recommended, see below). |
|
|
| Single Monitor
Digitizer Workstation (Model DKT-XJ1000A) |
|
Includes DKT-XJ5A Digitizer
Pedestal plus Monitor Support Assembly, (1) Monitor Arm with Keyboard Tray, and adjustable Computer Shelf. |
|
Monitor arm/keyboard tray swivel
180°, adjusting easily to your needs. |
|
Monitor arm supports 14 to 27
inch monitors. |
|
Small
footprint—10.5 sq. ft. |
|
Includes Levelers or optional
Casters (6-Caster Set recommended, see below.) |
|
|
| Double
Monitor/Printer Digitizer Workstation (Model
DKT-XJ1500A) |
|
Includes DKT-XJ1000A Single
Monitor Digitizer Workstation plus an additional Monitor Arm or Printer Arm. |
|
"Start small, add
later"—all workstations are modular. |
|
Includes Levelers or optional
Casters (6-Caster Set recommended, see below). |
|
|
| Computer Shelf
(Model DKT-XJC1) |
|
Supports all desktop
PCs—tower or horizontal. |
|
|
| Plan Hold-Down
for 36X48 (Model DKT-PHD) |
|
Fits most 36X48 digitizers. |
|
|
| Plan Hold-Down
for 42X60 or 36X48 (Model DKT-PHD-C) |
|
Fits Calcomp 36X48 Drawing
Board III or GTCO 42X60. |
|
|
| 4-Caster Set
(Model DKT-XJLC4) |
|
Fits DKT-XJ5A Digitizer
Pedestal. |
|
Includes (2) Locking Casters
and (2) Rolling Casters. |
|
|
| 6-Caster Set
(Model DKT-XJLC6) |
|
Fits DKT-XJ1000A and
DKT-XJ1500A Workstations. |
|
Includes (2) Locking Casters
and (4) Rolling Casters. |
|
|
| Table Top for
36X48 (Model DKT-XJ-TT3648) |
|
Table Top attaches to pedestal;
for use with 36X48 Roll-Up Digitizer. |
|
Footprint: 43"x60" |
|
|
| Table Top for
30X36 (Model DKT-XJ-TT3036) |
|
Table Top attaches to pedestal;
for use with 30X36 Roll-Up Digitizer. |
|
Footprint: 43"x48" |
